CONTACT US

If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!

+86-15106827879

Mobile

+86-15020631272

Whatsapp

info@gdnbearing.com

E-mail

Insert Bearings- UK+H Type

Insert Bearings- UK+H Type

The UK wide inner ring ball bearing uses an adapter sleeve locking mechanism and is suggested for industrial applications where normal loads are encountered. Bearing prelubricated and ready for immediate installation. The wide inner ring provides effective shaft support for a broad range of industrial applications. An external steel flinger provides additional protection from contamination. The UK series features superfinished raceways, grade-10 balls for smooth running and low noise operation. UK series wide inner ring ball bearings have spherical outside diameters for use in housings with corresponding spherical inside surfaces to compensate for shaft misalignment.
VIEW MORE +
UCFU Type

UCFU Type

Square flanged ball bearing unit with set screw locking, cast iron. They consist of an insert bearing, with an extended inner ring and grub screw locking, suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
VIEW MORE +
Wheel Hub Bearing

Wheel Hub Bearing

Wheel bearings are an essential part of your vehicle's steering and suspension system. Wheel bearings are responsible for keeping the wheels attached to the vehicle. They allow each wheel to spin freely and at the desired speed. Wheel bearings take a steady amount of abuse. They support the entire weight of your vehicle while traveling over rough roads, potholes and other rugged terrain. Wheel bearings are one of the longest lasting steering and suspension parts, but it really depends on driving habits, driving conditions and other factors.
VIEW MORE +
70000C Series

70000C Series

Angular contact bearing balls (type 70000 C) with α=15° can bear unidirectional axial load. When bearing pure radial load, bearings must be installed and used in pairs, because the action line of rolling element load and the action line of radial load are not in the same plane, resulting in internal separation force.
VIEW MORE +
70000B Series

70000B Series

Angular contact bearing balls with α=40° (70000 B type), can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non- separable. Mainly used in a wide range of industries such as automobiles, electrical equipment, machine tools, and aircraft.
VIEW MORE +
7200_7300BEP Series

7200_7300BEP Series

Single row angular contact ball bearings consist of an outer ring, an inner ring, a row of steel balls and a cage. This type of bearing can bear radial load and axial load at the same time, and can also bear pure axial load, and can work at high speed. Single row angular contact ball bearings can only withstand axial loads in one direction. The "BEP" suffix is a nylon retainer, and the "BECBM" suffix is a copper retainer.
VIEW MORE +
< 1...8910...17 >