CONTACT US

If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!

+86-15106827879

Mobile

+86-15020631272

Whatsapp

info@gdnbearing.com

E-mail

53000 Series

53000 Series

Type 53000 bearings are single direction thrust bearings with spherical housing locating washers to accommodate axial loads in one direction. They must not bear any radial loads. Many components are interchangeable. The shaft washers have ground holes for an interference fit. This type not only has a separable design for easy installation/removal and maintenance inspection, but also interchanges components, the ground holes of the shaft washers allow for an interference fit, and the spherical housing washers accommodate initial misalignment.
VIEW MORE +
53000U Series

53000U Series

53000 U-Bearings are bearings with self-aligning seat washers that can be used with self-aligning seat washers to compensate for angular misalignment between the support surface in the housing and the shaft. Depending on the bearing series, spherical seat washers have the basic designation U 2, U 3 or U 4, plus two digits indicating the size (eg spherical seat washer U 320 for bearing 53320).
VIEW MORE +
F Series

F Series

There is an inner ring NA.NK type needle roller bearing. Since the inner ring has no rib, the inner ring, outer ring, a full set of needle rollers and cages can be installed separately, and the axial displacement of the shaft or housing is not restricted. Since the needle rollers are separated by a cage, the friction is reduced, so it can be used in parts with high rotation speed.
VIEW MORE +
54000 Series

54000 Series

Double direction thrust ball bearings include a shaft washer, two seat washers and two steel ball-cage assemblies. The bearing is a separate type, and each part can be installed independently. Double direction bearings and single direction bearings use the same shaft washer, seat washer and steel ball-cage assembly.
VIEW MORE +
1200 Series

1200 Series

1200 Series Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
VIEW MORE +
Thrust Cylindrical Roller Type 80000

Thrust Cylindrical Roller Type 80000

Cylindrical roller thrust bearings can be split into thrust cylindrical roller and cage assemblies, shaft washers and races. Such bearings can withstand large axial loads in one direction, but cannot withstand radial loads, and they do not have self-aligning capabilities. Mainly used in heavy machine tools, high-power marine gearboxes, oil drilling rigs, vertical motors and other machinery.
VIEW MORE +
< 1...111213...17 >