Deep Groove Ball Bearings

Product News Download
Double Row

Double Row

Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. The design of double row deep groove ball bearings is basically the same as that of single row deep groove ball bearings. The deep groove ball shaft-shaped raceway plus the excellent tightness between the raceway and the steel ball.For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62xx and 63xx series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).

6000 Series

6000 Series

Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.

One Way Bearing

One Way Bearing

One-way bearing is a bearing that can rotate freely in one direction and lock in the other direction.Type CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. the working temperature exceeds 50°C.

Miniature Bearings

Miniature Bearings

Miniature deep groove ball bearings refer to metric series, with an outer diameter of less than 9mm; inch series, of various types of bearings with an outer diameter of less than 9.525mm, the main materials are carbon steel, bearing steel, stainless steel, plastic, ceramics, etc., of which the smallest inner diameter can be achieved 0.6mm, generally with an inner diameter of 1mm. Miniature deep groove balls are suitable for all kinds of industrial equipment, small rotary motors and other fields with high speed and low noise.