CONTACT US

If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!

+86-15106827879

Mobile

+86-15020631272

Whatsapp

info@gdnbearing.com

E-mail

6200 Series

6200 Series

Single row deep groove ball bearing is the most representative structure of rolling bearings and has a wide range of uses. The raceways located on the inner ring and the outer ring have an arc cross section with a radius slightly larger than the radius of the rolling ball. In addition to bearing radial load, it can also bear axial load in two directions. Low friction torque, most suitable for applications requiring high speed rotation, low noise and low vibration. This kind of bearing, in addition to the open type, also has a bearing with a steel plate dust cover, a bearing with a rubber seal, or a bearing with a snap ring attached to the outer diameter of the outer ring. Generally, steel stamping cages are used. Mainly applicable cage: steel stamping cage (wave shape, crown shape...single row; S shape...double row)
VIEW MORE +
Flange Bearings

Flange Bearings

Flange bearings are among the ultra-small bore miniature bearings, which can be divided into ZZ steel plate bearing dust cover series, RS rubber bearing sealing ring series, flange plate series, stainless steel series, ceramic ball series, etc. The miniature ball bearings have a wide range of uses. Suitable for products requiring high-speed rotation, low friction torque, low vibration and low noise.
VIEW MORE +
NUP Series

NUP Series

The outer ring of an NUP cylindrical bearing has two fixed ribs, whereas the inner ring of the cylindrical bearing has one fixed rib and one loose rib. This means that the NUP cylindrical bearing is able to axially locate the shaft in both directions. And It has high radial load carrying capacity, and low friction.
VIEW MORE +
NU2xx & NU3xx Series

NU2xx & NU3xx Series

NU Series are non-locating, single row Cylindrical Roller Bearings with cage. The inner ring is separable and without flanges on their side of the roller which slides in both directions and is commonly found in motors. To meet the various needs, cages are made from three different materials:Polyamide(ECP),Steel(ECJ), Brass(ECM).
VIEW MORE +
N2xx & N3xx Series

N2xx & N3xx Series

The outer ring of an N type single row cylindrical bearing has no ribs, whereas the inner ring of the cylindrical bearing has two fixed ribs. This means that the N cylindrical bearing cannot locate the shaft, therefore the axial displacement of the shaft relative to the casing can be accommodated in both directions.
VIEW MORE +
NU10xx EM Series

NU10xx EM Series

NU Series are non-locating, single row Cylindrical Roller Bearings with cage. The inner ring is separable and without flanges on their side of the roller.EM Series, which combines the strengths and technologies of previous cage designs into a one-piece brass roller-guided cage which achieves lower temperature running and quieter operation.High strength and wear resistant cage and High load rating.
VIEW MORE +
< 1...14151617 >